Get quick answers on how to install and use our products
1. Hold your Living in a Bubble side door flyscreen upright with the pleated end at the top.2. Align the center of the flyscreen with the center of the van door. Beginning with the center, magnetically attach the top of the flyscreen to the top of yo
1. Hold your Living in a Bubble rear door flyscreen upright with the pleated end at the top.2. Align the center of the flyscreen with the center of the van door. Magnetically attach the top of the flyscreen to the top and to the sides of your van's d
1. Open your car's front door.2. Slip the Living in a Bubble front window flyscreen over the top of the window frame.3. Pull the flyscreen down and attach the magnetic strip to the car door.4. Fasten and tighten the velcro around the base of the mirr
No worries - our front window flyscreens will still work with your front windows even with weathershields installed!
We have designed everything for maximum usability and ease. Our rear door screens close with zippers, while our side door screens close with magnets. Here are the reasons why:. The rear door screens feature zippered closures that ensure a secure seal
Yes, you absolutely can! Just ensure the flyscreen is not covering any door hinges, hooks, or sliding door rails before closing the van doors. For more detail, watch this video.
Please be advised that we recommend our flyscreens to be hand-washed using cold water!
1. With the black fabric facing up, fully open your Living in a bubble windshield and place it on the dash of your van.2. Where the window glass and dash meet, push the bottom of the windshield in to create a seal at the bottom of the window. Ensure
1. Begin with the door open to ensure proper alignment.2. With the black side facing the glass, place the cover onto the window. The magnets will automatically attach to the metal sides of the window frame.3. Ensure all edges are securely aligned on
1. With the black side against the glass, place the cover on the back door window. The magnets will easily latch to the metal sides of the window frame.2. Ensure all edges are securely aligned on the window.
1. Unscrew the vent fan flange from the inside of the van.2. Place the fan cover on any flat surface with the LOGO SIDE facing down3. Place the vent fan flange on top of the fan cover. Make sure the sides are aligned with each other.4. Place the prov
The windscreen cover is not magnetic. Once installed, it stays in place due to the fiber rods inside the cover and with the help of the sunvisors. For a better visual on how to install the windscreen cover, please watch the video below:
The black side is on the outside because our window covers are designed for stealth camping. They fit snugly against your windows and block out 100% of the light, thereby ensuring complete privacy inside your van. Also, even if the black side (or any
Yes, you can leave your window covers in place! Our window covers are designed to stand direct sunlight for very long periods. In addition to that, the black fabric is UV50+ and there are 2 layers of reflective aluminum inside of the covers so it won
You can install VHB tape on tinted windows — as long as the tint is high-quality and fully cured. Most vehicle tints are applied to the interior side of the window, which is where you’ll be placing the metal tabs with VHB tape for inside window cover
1. Loop the storage bag straps around the headrest poles of your seat.2. Hook the left and right bottom straps around the base of the seat or any available anchoring point beneath the seat.3. Check the alignment of the storage bag to ensure it is str
1. Use the snap closure at the top to secure the bag.2. Attach the detachable bottom strap around the base of the seat or any available anchoring point beneath the seat.3. When you want to remove the bag, it’s super simple—just unhook the bottom stra
No worries - the seat of your van can still swivel even with the Premium Seat Back Storage/Premium Seat Back Utility Back installed!. Please watch the video below for your reference: https://www.instagram.com/reel/DEyI_e2tOjt/